How to use large screen splicing screen properly

Failures that have caused maintenance and maintenance over a long period of time and cause splices on large screens are some of the more troubling issues, and the areas where failures occur are important parts of the system. If the problem is serious, then its maintenance costs will far exceed the cost of routine maintenance. If it is considered from an economic perspective, it will undoubtedly increase the cost of use. So here as a professional splicing big-screen manufacturer Rui Li gives you a few warm tips for users:

First, avoid pointing fingers on the screen with your fingers. Splicing large screens is very delicate, and the ability to fight against them is relatively weak. Direct finger pointing screens can easily increase dead pixels, which is why some users find the bad spots more and more for a period of time. This situation cannot be reversed and remedied.

Second, do not open the back cover of the LCD splicing screen with the power. In fact, even after the power is turned off, the transient voltage that remains is very high. The CFL transformer in the background lighting assembly still has a high voltage of about 1000V.

Third, keep the dry environment. The internal design of the large-screen splicing is very precise, and the environment is wet and it is easy to oxidize and corrode causing short-circuit and other phenomena, which brings huge economic losses to users. Therefore, we must try to keep the LCD splicing screen dry in use. If you find moisture on the surface of the screen, wipe it gently with a soft cloth before you turn on the power. If moisture has entered the splicing screen, the spliced large screen must be placed in a well-ventilated or warm place to allow water to evaporate. If the situation is more severe, ordinary users can ask professionals to help solve it. Do not allow the LCD splicing panel to work when the moisture is not removed. Otherwise, the electrode will be corroded, and the large splice screen will be permanently damaged.

Fourth, properly clean up the splicing screen. Splice large screens for long, easy to have some dust and dirt, cleaning the screen is inevitable. Use the correct cleaning method when cleaning: Use a soft, non-fiber absorbent cotton, lens paper, or a soft cloth to remove a little glass cleaner, and gently wipe dust or dirt off the screen.

Mobile Screen Protector Material,Screen Protector Roll Material,Raw Material for Screen Protector